Special Products
Urea Grade
- EN – DIN : X 2 Crnimo 17.13.2 , WNR. 1.4404,
- AISI / Others : 316 L - UG, UNS: S 31603
- EN – DIN : X 2 Crnimon 17.12.2, WNR. 1.4406,
- AISI / Others : 316 LN - UG, UNS: S 31653
- EN – DIN : X 2 Crnimon 17.13.3, WNR. 1.4429,
- AISI / Others : 316 LN(Mo+) - UG, UNS: (S 31653)
- EN – DIN : X 2 Crnimo 18.14.3, WNR. 1.4435,
- AISI / Others : 316 L (Mo+) – UG, UNS: (S 31653)
- EN – DIN : X 1 Crnimon 25.25.2, WNR. 1.4465,
- AISI / Others : 310 Mo LN, UNS: S 31050
- EN – DIN : X 1 Crnimon 25.22.2, WNR. 1.4466,
- AISI / Others : 310 Mo LN, UNS: S 31050
- Products : Pipes, Tubes, Bars, Flanges, Fittings, Plates & Sheets, Forgings & Valves
All Urea Grade Products Conforms To Stamicarbon / Saipem (Snamprogetti), Urea Casale Specifications
Urea Pipes, Flanges, Elbows & Valves
- 1.4466 (25:22:2 ) UNS S31050
- 1.4435 316l UG (Modified)
- Nickel Alloys, Super Duplex Titanium
- We Keep Stock Of Urea Grade Bars
- Sizes in Stock : 18 Mm, 20 Mm, 22mm, 25 Mm, 30 Mm, 32 Mm, 40 Mm, 50 Mm,100 Mm, 200 Mm
- UREA Grade Pipes : SS 316l Urea Grade, 25 CR-22NI -2 MO ( All Sizes & Heavy Wall Thickness)
- UREA Grade Valves : A Complete Range Of Urea Grade Valves To Compliment The Above Piping Range
Urea Grade Fittings
- All Pipe Fittings
- Lens Gasket
- Flange A105 / 316lug + Nipple
- Weld O Lets
- Pre - Fabricated Isometrics
- Other Products : As Per Drawing
- Bolts, Nuts & Washers : As Per Size And Spec's
Nitric Acid Grades
- EN – DIN : X 1 CRNISI 18.15, WNR. 1.4361, UNS: S 30600
- EN – DIN : X 1 CRNI 25.21, WNR. 1.4335, AISI / Others : 310 L, UNS : S 31002
- Products : Pipes, Tubes, Bars, Flanges, Fittings, Plates & Sheets, Forgings & Valves
PFA / PTFE Lined Pipes & Fittings
- Material : PTFE, M-PTFE, PFA, 451HP, 951 HP Plus
- Standard Size 2” ~20”
- Standard Length: 6m
- Others Are Upon Request
- PFA Liner Thickness : 2mmt~5mmt
- Ptfe Liner Thickness : 3mmt~12mmt
- According ASTM 1545-97 Standard
PFA / PTFE Thick Sheet
- Material: PFA 451HP, 951HP Plus, PTFE, M-PTFE, 951HP Plus FEP, PVDF, ETFE
- PFA Thickness : 5 ~ 50mm
- PTFE Thickness : 1.5mmt ~ 5mmt Width: 1.2m, 1.5m, 2m
- Others are upon request
PFA / PTFE Thick Rod
- Material: PFA 451HP, 951HP, PTFE, M-PTFE
- Diameter : 50 ~ 150mm
- Others are upon request
HP PFA / PVDF Tube & Pipe
- Material : PFA, PFA 451HP, 951HP, FEP, PVDF
- Standard Size : 1/4” ~8”
- Thickness : Std. or By Customer
- Length : STD. or By Customer
Fluoropolymer Heat Exchanger
- High Performance PFA Emmersion Coil Heat Exchanger
- Operation Pressure : ATM ~ 10 Kg / Cm2
- Operation Temperature : 20 Deg C ~ 180 Deg C
- Heat Exchanger Area : 0.1 M2 ~ 100 M2
- Depends On Customer’s Request
- Type : Shell & Tube, Customer Required
- Tube Size : (451hp, 951hp)
- 4MMOD × 3MMID PFA Tube
- Shell Size : 8”~14” (Shell & Tube)
- Heat Exchange Area : 1m2 ~ 65m2 (By Customer Design)
- Connector : Spiral Tooth or Flange
- Heat tracing, Trace Heating or Surface Heating is the method of heating and/or maintaining temperatures in pipelines, tanks/ vessels and pipeline equipment.
- Industrial Application:- Freeze Protection of Pipework , Process Temperature Maintenance,
- Heat Tracing : Above Ground Pipe Lines/ Long Buried Pipe Lines/Tanks & Vessels/Internal Pipe Tracing
- Commercial Application :- Freeze Protection of Pipework, Fuel Oil Tank Heating
- Products :- Self Regulating Heating Cables , Constant Wattage Heating Cables , Series Resistance (Longline) Heating Cables , Temperature Control and Monitoring /Constant Wattage Heaters/ Series (Longline) Heaters , Termination Methods.
- Castings are produced in carbon, stainless and nickel alloy steels to ASTM and BS specifications. General engineering castings includes valve and pump parts, mechanical handling components, earth moving and dredging castings.
- Products :- Tube sheets, tube sheet brackets, support brackets, support hangers and various static support castings, Furnace furniture, Centrifugal cast tube ,Reformer/Catalyst tube assemblies ,Radiant coil assemblies,Spring hanger supports for radiant Coils ,Cast fittings, Furnace Rollers ,Heaters of primary reformer/catalyst tubes .
- We can also supply treatment Fixtures for Continuous Gas Carburizing Furnaces, Sealed Quench Furnaces, Vacuum Furnaces, Fluidized Bed furnaces, Shaker Hearth Furnaces and fixtures suitable for polymer quenching, Heat Treatment Trays, Heat treatment baskets, Base Grids, Heat treatment work baskets in materials such as HU,HT,HK,22H,Super 22H,RA330 ,Valve body, Pump body and impeller castings.
- We are a specialized supplier of Chlorine Valves
- Application : Dry & Wet Chlorine Services
- Sizes - Up to 8”
© Value Line. All Rights Reserved
